Mitel Forums - The Unofficial Source
»
Mitel Forums
» Mitel SX200, SX2000, and older SX platforms
View full version:
Mitel SX200, SX2000, and older SX platforms
«
1
2
3
4
5
6
7
8
9
10
»
sx2000 PRI sending a 1 in fornt of international calls
200ICP, some phones can't call 911
Superset 420
Mitel SX 200 CX Installer Access Problem
Moving from PRI to Analog POTS lines
sx2000 remote login active to inactive
SX-2000 Light DBMS Save
Blocking all but 911 and operator calls
Mitel SX200 ICP copy keys
MITEL SX200 UNLOCK EXTENSIONS
Line out of service message
Incoming Calls - No Call Access
Mitel SX2000 HTL Commands
SX200 ICP - How to answer ringing console from admin phone.
IP paging unit in static environment
Single Digit Access to Voicemail
Mitel sx-200 what is needed to go to 5 pots lines instead of 1 hybryde t-1
Replacement for 4025 Digital Handset
200 ICP with AX controller
NVR error on SX 2000 cab
Maid codes not working with PMS
CEPT link failure
how to add and configure new ONS card on sx2000 Peripheral Cabinet
Sx 200 Superswitch console overlay
SX2000, Users PKM 12 has stopped working after power downs.
Mitel 200sx not following forwarding
transfer out no dtmf
Plane condition alarm
SX2000 Redundant system
Mitel 2000 trunk card PINOUT
Dialing conflct from AA
Error code 166, PMS requires console
Mitel SX-200 identify what voice-mail box is associated with an extension #
Embedded Mail
Message Length
Phantom/virtual ext
200ICP subattendant ID
SX200-ICP restarts and PCs premanently loose network connectivity
Need help regarding multiple callers at once
Keys for SX-200 cabinet
SX200ICP enable/disable maintenance port
SMDR report real-time response.
SX-50 Question....
5448 PKM on 5340 SX200ICP
Superset 4025
ADDing a PA system bull horn to sx200
Mitel sx200 hunt/ring group labels or tones
Trunk group hops
EXTERNAL BUSY - can't make any external phone calls
pausing a speedcall