Author Topic: Plane condition alarm  (Read 1972 times)

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Plane condition alarm
« on: April 28, 2015, 12:12:33 PM »
Alarm on a 2k that states "Plane Condition active not synchronized to primary" viewed from plane B. System has not switched planes in "at least 3 weeks." How do I resolve this and what causes it? I haven't worked on a 2k in a while and when I did, it wasn't often.


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5768
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Plane condition alarm
« Reply #1 on: April 28, 2015, 01:04:20 PM »
I think I would try to simply reboot the inactive plane 1st. 
If that doesn't work then you may want to try and do a busy mate and rts mate.
If that doesn't work then you may want to try and partition the planes and then join them again.
If that doesn't work then you may want to try and reload the software on the inactive plane.

Ralph

commands that may help:  show stat red


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1225
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Plane condition alarm
« Reply #2 on: May 01, 2015, 10:53:07 AM »
commands that may help:  show stat red

I think you mean "file stat red".

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5768
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Plane condition alarm
« Reply #3 on: May 01, 2015, 10:59:30 AM »
Thanks lundah.
That's what I meant.
I find myself sometimes mixing 2k command with the 3300 which uses a show command.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10