Author Topic: sx2000 PRI sending a 1 in fornt of international calls  (Read 1845 times)

Offline JK

  • Contributer
  • *
  • Posts: 6
  • Country: us
  • Karma: +0/-0
    • View Profile
sx2000 PRI sending a 1 in fornt of international calls
« on: November 04, 2015, 10:54:30 AM »
I have a sip based pri from AT&T connected to a sx 2000 Pri card in a dsu node. It is set for NI2 Belcore. On international calls we are sending a 1 and the carrier is rejecting the call. I tried to change the enable unknown ton/np but that made no difference. I changed the protocall variant from belcore to 5ess and it added two 1's in front of international calls. Any help on this problem would be greatly appreciated. AT&T is not helping in this issue.


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: sx2000 PRI sending a 1 in fornt of international calls
« Reply #1 on: November 04, 2015, 01:43:13 PM »
It sounds like your Digit Modification entry for that route is inserting a 1, have you verified you have the correct DM applied to your route, and are absorbing/inserting the proper digits?

Offline JK

  • Contributer
  • *
  • Posts: 6
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: sx2000 PRI sending a 1 in fornt of international calls
« Reply #2 on: November 04, 2015, 02:39:14 PM »
It is not in the digit mod tables the 1 is being inserted Via the IMAT software. Already tested that ( I thought the same thing at first)


 

Sitemap 1 2 3 4 5 6 7 8 9 10