Author Topic: sx2000 remote login active to inactive  (Read 2017 times)

Offline techoic

  • New Member
  • *
  • Posts: 3
  • Country: us
  • Karma: +0/-0
    • View Profile
sx2000 remote login active to inactive
« on: October 16, 2015, 04:19:23 PM »
Hello, sometimes when I modem into an sx2000, and do "where" cmd. it shows I am on the inactive plane. Is it possible to switch to the active plane? If so, how is it done?  Thanks.


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: sx2000 remote login active to inactive
« Reply #1 on: October 16, 2015, 04:32:39 PM »
It depends on what port your modem is connected to. On the redundant controoler there are 2 connections and depending on what processor is active, one will be active and the other inactive.

You can connect the modem to a per node and it will always be on the active plane

Offline techoic

  • New Member
  • *
  • Posts: 3
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: sx2000 remote login active to inactive
« Reply #2 on: October 16, 2015, 05:04:05 PM »
That was what I wanted to hear. I thought that maybe there was a command to move to the active plane but couldn't find the command.
Now I will move the modem to one of the other ports, like where the maintenance console is connected to.J10

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: sx2000 remote login active to inactive
« Reply #3 on: October 16, 2015, 06:44:44 PM »
Yes, being on the inactive plane is best set for maintenance. For the everyday thing, having the modem on the active is best.


 

Sitemap 1 2 3 4 5 6 7 8 9 10