Author Topic: Mitel SX2000 HTL Commands  (Read 2455 times)

Offline Felix

  • Contributer
  • *
  • Posts: 23
  • Country: gb
  • Karma: +1/-0
    • View Profile
Mitel SX2000 HTL Commands
« on: September 17, 2015, 08:50:04 AM »
Hi all,

I have a few hotel customers on the old SX2000 system and I am after some help in the HTL commands.

I already know a few to see the status and to reset and initalise the link but after that im stuck.

I know one of the options is debug but not sure what to do with that one. I think its to carry out a trace on the link but cannot seem to get this to work.

I cannot find any documentation for the commands in the technicials handbook or the web.

Thanks all.


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1215
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Mitel SX2000 HTL Commands
« Reply #1 on: September 18, 2015, 12:48:55 PM »
PMS TRACE ENABLE will show you the activity on the PMS link. PMS TRACE DISABLE to turn it off. That's really all I've ever had to use. Might see if "HELP PMS" gives you any other options.


 

Sitemap 1 2 3 4 5 6 7 8 9 10