Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mecit

Pages: [1] 2
1
It is working now.

I created a speed call 1326. I created a button 6326 on one of our ext. that is a PKM.
Selected a always alternative number (14) and selected reroute on all options to 1326.
Went to call rerouting an entered 14 in the first 3 options on ext 6326.

2
I tried 1326. got the invalid ext.

how should I create it?

3
Is this what you are asking for

NUPOINT VOICE SYSTEM CONFIGURATION
 
 Group #1: "Voice Mail"
  Module 1: Lines 0:0 0:1 0:2 0:3 0:4 0:5 0:6 0:7 0:8 0:9 0:10 0:11
            Voice Recognition Conn: <none>
  Application = [NUPOINT VOICE]
  NP Call Director Interface
   Dial plan = [4,5,3,3,3,3,3,3,3]
   Administrator mbox # = [9998]
   General Greeting mbox # = []
   Attendant mbox # = [9999]
   Transfer Call Box # = [S+]
   Wait Prompt = [Y]
   Caller multiple messages enabled = [Y]
   KEY_0 for attendant transfer during greeting = [Y]
   Disconnect string = []
   Pre-company name string = []
   Pre-mailbox greeting string = []
   Passcode Length  Min = [4], Max = [10], Language = [English]
   "6" Key Operator Transfer Dial String = []
   "6" Key Operator Transfer pre-Dial String = []
   Start of day = [08:00 AM], End of day = [05:00 PM], Days of Week = [DDDDDNN]
   Passcode trip count = [5],  Passcode trip period = [24]
   Dial-by-name: Last First = [Y], Match Threshold = [3], Exact = [Y]
                 Suppress Number = [N], Single Digit Access = [N]
   Delay Before Answer = [50]
   E-mail Transfer String = []
   Allow Dial an Extension for callers = [Y], users = [Y]
   Analog Networking: Call Setup timeout = [6]
      International Access Code = [], Country code = []
      Area/City code = [], 1plus dialing = []
      Area/City code is dialed with Local Telephone Number = [N]
      Telephone number = [], Loop-back Test Mailbox = []
   Name Greet Quality =
  • , Message Quality =

   Pre-DN = [S+], Post-DN =
  • , Connect = [], Serial = [S+]

   Return = [S+], Return call reject = [++], Reorder Action = [0H]
   PBX dial plan = [4,5,3,3,3,3,3,3,3]
   Offsets = [0,0,0,0,0,0,0,0,0]
   Deleted digits = [0,0,0,0,0,0,0,0,0]
   Timeout for receipt of first DTMF digit (.1 seconds) =

   Greet/Name = [G], PBX console operation = [N]
   Day operator = [0H], Night operator = [0H]
   Attendant extension = [1000]
   TDD - Dialtone detect time =

   TDD - Minimum Dialtone Detect Power =

   TDD - Play delay after DTMF detect =


 Group #2: "OutDial"
  Module 1: Lines 0:12
            Voice Recognition Conn: <none>
  Application = [PAGER DIALER]
   Dial plan = []
   Administrator mbox # = [9998]
   General Greeting mbox # = []
   Attendant mbox # = [9999]
   Wait Prompt = [Y]
   Caller multiple messages enabled = [Y]
   KEY_0 for attendant transfer during greeting = [N]
   Disconnect string = []
   Pre-company name string = []
   Pre-mailbox greeting string = []
   Passcode Length  Min = [4], Max = [10], Language = [English]
   "6" Key Operator Transfer Dial String = []
   "6" Key Operator Transfer pre-Dial String = []
   Start of day = [08:00 AM], End of day = [05:00 PM], Days of Week = [DDDDDNN]
   Passcode trip count = [5],  Passcode trip period = [24]
   Dial-by-name: Last First = [Y], Match Threshold = [3], Exact = [Y]
                 Suppress Number = [N], Single Digit Access = [N]
   Delay Before Answer = [50]
   E-mail Transfer String = []
   Allow Dial an Extension for callers = [N], users = [N]
   Analog Networking: Call Setup timeout = [6]
      International Access Code = [], Country code = []
      Area/City code = [], 1plus dialing = []
      Area/City code is dialed with Local Telephone Number = [N]
      Telephone number = [], Loop-back Test Mailbox = []
   Name Greet Quality =
  • , Message Quality =

   Attendant's extension = [1000]
   Pre DN or attendant xfer string = [S+]
   Supports pager systems:
     
  • = "Internal"
  • [1] = "External"

4
 Will I do this in the Nupoint or 3300.

5
I am not sure. How would I check it?

6
Yes we can. just got a confirmation.

7
I am not sure. Would I be able to check somewhere to find out.

8
TX

9
I am still needing some assistance.

10
I am hearing invalid ext.
On the phone, I see held by vm port 7 then it just shows vm port 7.

11
Yes I am using a Nupoint

12
I tried creating a mailbox for it but the same result occurred. Invalid Ext number

13
The setup works when I dial 6325 on my phone but when it try the call flow it gives me the same error "not a valid ext."

14
I can accept a call and then transfer to the speed dial.

I tried setting up a key with 6326 but would not accept it becuase it waas already being used.
the phantom ext, would I create an ext  6325 under users and then in the always rerouting point it to the 6326

15
Can you explain what you meant by accepting a call and then xfer out to system speed dial number.
Can you also explain on how to build a phantom ext and call reroute always to speed call

Pages: [1] 2