Is this what you are asking for
NUPOINT VOICE SYSTEM CONFIGURATION 
 Group #1: "Voice Mail"
  Module 1: Lines 0:0 0:1 0:2 0:3 0:4 0:5 0:6 0:7 0:8 0:9 0:10 0:11
            Voice Recognition Conn: <none>
  Application = [NUPOINT VOICE]
  NP Call Director Interface
   Dial plan = [4,5,3,3,3,3,3,3,3]
   Administrator mbox # = [9998]
   General Greeting mbox # = []
   Attendant mbox # = [9999]
   Transfer Call Box # = [S+]
   Wait Prompt = [Y]
   Caller multiple messages enabled = [Y]
   KEY_0 for attendant transfer during greeting = [Y]
   Disconnect string = []
   Pre-company name string = []
   Pre-mailbox greeting string = []
   Passcode Length  Min = [4], Max = [10], Language = [English]
   "6" Key Operator Transfer Dial String = []
   "6" Key Operator Transfer pre-Dial String = []
   Start of day = [08:00 AM], End of day = [05:00 PM], Days of Week = [DDDDDNN]
   Passcode trip count = [5],  Passcode trip period = [24]
   Dial-by-name: Last First = [Y], Match Threshold = [3], Exact = [Y]
                 Suppress Number = [N], Single Digit Access = [N]
   Delay Before Answer = [50]
   E-mail Transfer String = []
   Allow Dial an Extension for callers = [Y], users = [Y]
   Analog Networking: Call Setup timeout = [6]
      International Access Code = [], Country code = []
      Area/City code = [], 1plus dialing = []
      Area/City code is dialed with Local Telephone Number = [N]
      Telephone number = [], Loop-back Test Mailbox = []
   Name Greet Quality = 
   Pre-DN = [S+], Post-DN = 
- , Connect = [], Serial = [S+]
   Return = [S+], Return call reject = [++], Reorder Action = [0H]
   PBX dial plan = [4,5,3,3,3,3,3,3,3]
   Offsets = [0,0,0,0,0,0,0,0,0]
   Deleted digits = [0,0,0,0,0,0,0,0,0]
   Timeout for receipt of first DTMF digit (.1 seconds) = 
   Greet/Name = [G], PBX console operation = [N]
   Day operator = [0H], Night operator = [0H]
   Attendant extension = [1000]
   TDD - Dialtone detect time = 
   TDD - Minimum Dialtone Detect Power = 
   TDD - Play delay after DTMF detect = 
 Group #2: "OutDial"
  Module 1: Lines 0:12
            Voice Recognition Conn: <none>
  Application = [PAGER DIALER]
   Dial plan = []
   Administrator mbox # = [9998]
   General Greeting mbox # = []
   Attendant mbox # = [9999]
   Wait Prompt = [Y]
   Caller multiple messages enabled = [Y]
   KEY_0 for attendant transfer during greeting = [N]
   Disconnect string = []
   Pre-company name string = []
   Pre-mailbox greeting string = []
   Passcode Length  Min = [4], Max = [10], Language = [English]
   "6" Key Operator Transfer Dial String = []
   "6" Key Operator Transfer pre-Dial String = []
   Start of day = [08:00 AM], End of day = [05:00 PM], Days of Week = [DDDDDNN]
   Passcode trip count = [5],  Passcode trip period = [24]
   Dial-by-name: Last First = [Y], Match Threshold = [3], Exact = [Y]
                 Suppress Number = [N], Single Digit Access = [N]
   Delay Before Answer = [50]
   E-mail Transfer String = []
   Allow Dial an Extension for callers = [N], users = [N]
   Analog Networking: Call Setup timeout = [6]
      International Access Code = [], Country code = []
      Area/City code = [], 1plus dialing = []
      Area/City code is dialed with Local Telephone Number = [N]
      Telephone number = [], Loop-back Test Mailbox = []
   Name Greet Quality = 
   Attendant's extension = [1000]
   Pre DN or attendant xfer string = [S+]
   Supports pager systems:     
-  = "Internal"[1] = "External"