3300 CXI alarm 'DSP 2 installed 1 unavailable minor alarm"

[Northeaster]

Hi guys,
 
On my 2 demo 3300 CXIs, I get the above alarm, in the GUI, under Maintenance and Diagnostics, alarms.
 
If I do a Show Status alarm, it says no alarms.
If I do a Show Faults Receivers, it says no faults.
 
I read the 9.0 Release notes, and saw something about upgrading the Bootrom all command.  Tried that, but alarm still there - only when you click on alarms - not there in top left alarm banner location, or when Show Satus Alarms.
 
The systems are stock - no additional DSPs, of any type, installed!!

Any ideas?

[ralph]

I usually see this alarm when one 3300 cannot talk via IP turnking to another 3300.

Ralph

[Mattmayn]

The system may be telling you that it wants another DSP. The way the system sees things isn't by the required load at a given time but by the amount of resources it would need for what you are licensed. I bet if you were to install either a DSPII or another quad DSP in the controller it would go away.

What do you have licensed on the controller?

[Eciroglu_elektronik]

1. Maintenance Commands  <uppgradebootrom>   submit
2. Maintanence Commands  <restart>                      submit


now the error does not...

good work come easy...