Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Yes you can use "Call Forwarding - Follow Me - Third Party" FACAs long as you have it allowed in your COSProgram a Speed Call for your button, you will need one to enable and another to disable.
The FAC you want is "Call Forwarding - Follow Me - Third Party" and "Cancel Call Forwarding - Follow Me - Third Party"Let's say *65 = Call Forwarding - Follow Me - Third Party*75 = Cancel Call Forwarding - Follow Me - Third PartyCOS for 1111 would need to have "Third Party Call Forward Follow Me Allow" set to yes2222 would need to have "Third Party Call Forward Follow Me Accept" set to yesTo Forward 2222 to 3333*65 2222 3333To cancel Forwarding*75 2222You can then program these codes as a "User Speedcall" on a key.
Yes. Call into VM like that will see an external call and put you into Auto Attendant. You have to break the intergration that is automatic for this. There are a cpouple of ways. One is by setting up a ADC route and the other is using name tag hunt groups.Thre are posts on here about it but its that long since I used this I won't attempt it and get it wrong.