Messages

1

Mitel MiVoice Business/MCD/3300 / Re: MITEL caller ID

« on: August 17, 2016, 05:00:35 AM »

 acejavelin:
i already set Yes on COS of analog set  :Enable ONS CLASS/CLIP&Calling Name Display - Internal - ONS & Calling Number Display - Internal - ONS, but still no CallerID apper  !!!!!!!!!!!!!!.
Regards

2

Mitel MiVoice Business/MCD/3300 / MITEL caller ID

« on: August 16, 2016, 05:27:22 AM »

Hi,

We are having trouble presenting Caller ID to our analog handsets(Not mitel Device).(from outside to analog extension and from internal analog extension to internal analog extenuation )  all options are set correctly and Caller ID is enabled on the physical line (E1)

the following is set in the relevant Class of Services:

Trunks (set to yes)
DASS II OLI/TLI Provided

Trunks (set to no)
ANI/DNIS/ISDN Number Delivery Trunk
Display ANI/ISDN Calling Number Only
Display ANI/DNIS/ISDN Calling/Called number

Sets (set to yes)
DASS II OLI/TLI Provided
Display ANI/ISDN Calling Number Only
Display ANI/DNIS/ISDN Calling/Called number

Sets (set to no)
ANI/DNIS/ISDN Number Delivery Trunk

CLASS Trunk option under CO Trunk Circuit Descriptor Assignment set to Yes

any other configuration should be set to callerID present

Hardware: 3300 MXe + AX clustered

3

Mitel MiVoice Business/MCD/3300 / Re: Logging incoming number

« on: July 12, 2016, 07:34:59 AM »

Found it in SMDR Option .. :-)
Thanks

4

Mitel MiVoice Business/MCD/3300 / Re: Logging incoming number

« on: July 12, 2016, 05:49:42 AM »

Hi Andrew

can you explain where exactly change the " ANI/DNIS/ISDN/CLASS Number Delivery Reporting = Yes" in COS??

many Thanks

5

Mitel MiVoice Business/MCD/3300 / Re: No caller ID on Ax or MXe

« on: June 16, 2016, 03:45:19 AM »

ONS CLASS/CLIP: Set' to yes  already set "yes" ..

Any other option on COS can effect to my problem ??

6

Mitel MiVoice Business/MCD/3300 / Re: No caller ID on Ax or MXe

« on: June 15, 2016, 09:05:12 AM »

I check configuration of caller ID on the COS for trunk and COS for analog phone (User) its the same.
to recheck can you advice any options  i should change it in the COS to let Caller ID show.   

Thanks in advance

7

Mitel MiVoice Business/MCD/3300 / No caller ID on Ax or MXe

« on: June 14, 2016, 03:22:56 AM »

Hello,
i  have a problem with Mitel AX and MXe while i use both IP  and analog phone , and the main incoming line from the telecommunication company is E1.
so i get the caller ID from the carrier  on IP phone wile i just get " incoming call" on analog phone  so no caller id on analog device !!!
i tray to change the phone as i read on one of topics but still the same !!!
any idea guys can help  ?