Hi,
We are having trouble presenting Caller ID to our analog handsets(Not mitel Device).(from outside to analog extension and from internal analog extension to internal analog extenuation ) all options are set correctly and Caller ID is enabled on the physical line (E1)
the following is set in the relevant Class of Services:
Trunks (set to yes)
DASS II OLI/TLI Provided
Trunks (set to no)
ANI/DNIS/ISDN Number Delivery Trunk
Display ANI/ISDN Calling Number Only
Display ANI/DNIS/ISDN Calling/Called number
Sets (set to yes)
DASS II OLI/TLI Provided
Display ANI/ISDN Calling Number Only
Display ANI/DNIS/ISDN Calling/Called number
Sets (set to no)
ANI/DNIS/ISDN Number Delivery Trunk
CLASS Trunk option under CO Trunk Circuit Descriptor Assignment set to Yes
any other configuration should be set to callerID present
Hardware: 3300 MXe + AX clustered