« previous next »
Pages: [1]   Go Down

Author Topic: MITEL caller ID  (Read 3385 times)

Offline fkhudari

  • Contributer
  • *
  • Posts: 7
  • Country: lb
  • Karma: +0/-0
    • View Profile
MITEL caller ID
« on: August 16, 2016, 05:27:22 AM »

Hi,

We are having trouble presenting Caller ID to our analog handsets(Not mitel Device).(from outside to analog extension and from internal analog extension to internal analog extenuation )  all options are set correctly and Caller ID is enabled on the physical line (E1)

the following is set in the relevant Class of Services:

Trunks (set to yes)
DASS II OLI/TLI Provided

Trunks (set to no)
ANI/DNIS/ISDN Number Delivery Trunk
Display ANI/ISDN Calling Number Only
Display ANI/DNIS/ISDN Calling/Called number

Sets (set to yes)
DASS II OLI/TLI Provided
Display ANI/ISDN Calling Number Only
Display ANI/DNIS/ISDN Calling/Called number

Sets (set to no)
ANI/DNIS/ISDN Number Delivery Trunk

CLASS Trunk option under CO Trunk Circuit Descriptor Assignment set to Yes

any other configuration should be set to callerID present ???

Hardware: 3300 MXe + AX clustered
Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MITEL caller ID
« Reply #1 on: August 16, 2016, 08:54:26 AM »
In the Analog Set COS -

Enable ONS CLASS/CLIP
Enable Calling Name Display - Internal - ONS
Enable Calling Number Display - Internal - ONS

Look in the embedded help under System Features - Features C - CLASS/CLIP Station Side Software Support for exact programming procedure.
Logged

Offline fkhudari

  • Contributer
  • *
  • Posts: 7
  • Country: lb
  • Karma: +0/-0
    • View Profile
Re: MITEL caller ID
« Reply #2 on: August 17, 2016, 05:00:35 AM »
 acejavelin:
i already set Yes on COS of analog set  :Enable ONS CLASS/CLIP&Calling Name Display - Internal - ONS & Calling Number Display - Internal - ONS, but still no CallerID apper  !!!!!!!!!!!!!!.
Regards
Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MITEL caller ID
« Reply #3 on: August 17, 2016, 05:56:21 PM »
Quote from: fkhudari on August 17, 2016, 05:00:35 AM
acejavelin:
i already set Yes on COS of analog set  :Enable ONS CLASS/CLIP&Calling Name Display - Internal - ONS & Calling Number Display - Internal - ONS, but still no CallerID apper  !!!!!!!!!!!!!!.
Regards
Does caller ID appear on the Mitel sets?
Logged

Offline boycey9

  • Full Member
  • ***
  • Posts: 182
  • Karma: +4/-0
    • View Profile
Re: MITEL caller ID
« Reply #4 on: August 19, 2016, 02:23:09 PM »
Not all analogue phones support the same standard for clip, you may need to try a different handset
Logged

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: MITEL caller ID
« Reply #5 on: August 30, 2016, 07:31:42 AM »
Someone suggested this to me off line.
Quote
I think you should have, is to increase the dsp and allocate some to generate the FSK signal in a peripheral cabinet

I had forgotten that the last time I did this I needed to convert some DTMF Tone Generators (I think that was it) to FSK.
Do a help file search for FSK to see if that gets you somewhere.

Ralph
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10