Guys,
Thanks for the information and I will continue to try and figure this out as I believe it will speed up a lot of programming. Things that I have learned so far.
1. Prime Line can now be labeled, but not through the Multiline Set Keys form. Any subsequent Multicall keys can be labeled through this form, but it has to be done manually for each phone.
2. Copying Multicall keys will auto-create them with the correct Directory Number, but you still need to manually change them as the original label is copied over as well.
2. DSS/BLF keys can not be moved around on the same phone; they have to be deleted first and then reprogrammed.
3. Personal Presence can be copied across multiple keymaps, but the DN has to be changed as it is brings in the original DN that is was copied from.
Ralph,
I am doing this all on the new 69xx series phones. The Prime DN key always shows up as My Phone by default and our standard is to change that to the DN along with a second multicall key which shows up as blank. The icons for the Prime DN and the second multicall key appear different as well, but there isn't a way to change that. As I stated before the Prime DN is pre-labeled with My Phone and the button is blue, but a second Multicall key has no label and the key is green.
I find that most of the color scheme is not very well thought out as blue means a toggled key is on and grey means it is off. The good thing for most of the toggled keys they also change the button to say On or Off as well. The Day/Night Mode button however is different in that it only changes color from blue to grey.
Thanks,
TE