Poll

Door opener?

Door opener?
0 (0%)
Door opener?
1 (100%)

Total Members Voted: 1

Author Topic: Door Opener  (Read 5350 times)

Offline pskugdpskyst

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Door Opener
« on: August 10, 2010, 08:32:12 AM »
hi,
i have Mxe controller and i want to connect with door strick so that the reception guy can dial code to open the door, how can I do that?


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Door Opener
« Reply #1 on: August 10, 2010, 11:35:26 AM »
You'll need a device that can listen to touchtones and react to them.
You'll need to connect this to an analog trunk port on the 3300.
Here's the link for Viking Electronics that will show you several models to choose from.
www.vikingelectronics.com/products/search_cat_results.php?mycategory=23

Ralph
« Last Edit: April 22, 2014, 04:27:14 PM by ralph »

Offline pskugdpskyst

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Door Opener
« Reply #2 on: August 10, 2010, 07:15:37 PM »
I already have an access control system install in our office the thing is if I want to open the door I have to make Zero Volte which will not come from ONS or the analoge trunk . I try to make it work with ONS put always there is voltage I and I can't have my Zero |Voltage to open the door? do you have specific courfigration on Mxe do to that ?

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Door Opener
« Reply #3 on: August 11, 2010, 07:27:00 AM »
You have a ciruit that is NC and you want to open it by pressing a button or button sequence on the 3300? Will the relay port work for this? If not looking at the pinout for the paging port shows both NC and NO config. As long as you don't need the paging port for anything I don't see why this wouldn't work.

Offline Chakara

  • Hero Member
  • *****
  • Posts: 607
  • Karma: +2/-0
    • View Profile
    • Kyle Petree
Re: Door Opener
« Reply #4 on: August 12, 2010, 12:58:14 AM »
  Is there a device out there that could work on FXO or FXS and trigger a relay.  Either when it gets ring, or when it goes off hook, depending on the port type?  Wouldn't have to be one device for both.....just wondering.  A brief google didn't hit this one for me.  Such a thing could work in this and other scenarios me thinks.....

-Chak


 


 

Sitemap 1 2 3 4 5 6 7 8 9 10