Author Topic: Embedded Reporting feature is disabled  (Read 1517 times)

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Embedded Reporting feature is disabled
« on: May 17, 2016, 02:15:33 PM »
I went into an site today to look up some call records the other day from the Reporting tab, but all I got was a message that said:

Quote
Some reports are not available because the Embedded Reporting feature is disabled. Please go to DB Programming and enable Embedded Reporting.

I poked around all over and searched the help document, but I can't find this option anywhere... Where do I enable it at?


Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: Embedded Reporting feature is disabled
« Reply #1 on: May 17, 2016, 02:29:23 PM »
Acejavelin,

Well my friend that would require that you turn on the On-Line Monitor feature and then go to System Flags.

There is usually a good reason to turn it off though; like the CPU is choking and having a hard time with all the processing so you shut that down to give it a little wiggle room.

Thanks,

TE

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Embedded Reporting feature is disabled
« Reply #2 on: May 17, 2016, 02:52:25 PM »
Acejavelin,

Well my friend that would require that you turn on the On-Line Monitor feature and then go to System Flags.

There is usually a good reason to turn it off though; like the CPU is choking and having a hard time with all the processing so you shut that down to give it a little wiggle room.

Thanks,

TE
That was it... too bad it doesn't store the last of weeks worth of call records though. I will leave it on and hopefully catch my issue later.

Thanks again for all your help!!!


 

Sitemap 1 2 3 4 5 6 7 8 9 10