Author Topic: Mitel SX2000 Maintenance Port Locked  (Read 1771 times)

Offline Felix

  • Contributer
  • *
  • Posts: 23
  • Country: gb
  • Karma: +1/-0
    • View Profile
Mitel SX2000 Maintenance Port Locked
« on: March 03, 2016, 06:08:58 AM »
Hi all,

Just wondering if someone could give me a pointer to the issue I am having?

I have a SX2000 Light Non-Redundant PBX which seems to have the maintenance port locked out and unresponsive. I have tried connecting via a tracker and direct on the port with the same issue.

I have rebooted the PBX twice and also via a scheduled reboot but I am still not getting any response.

Does anyone have any ideas or is replacing the card my last option?

Thanks all.


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel SX2000 Maintenance Port Locked
« Reply #1 on: March 03, 2016, 08:29:53 AM »
The only thing I could think of would be sending it a CTL-Q

Ralph

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1215
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Mitel SX2000 Maintenance Port Locked
« Reply #2 on: March 03, 2016, 08:49:28 AM »
Can you telnet into the Ethernet interface on the MC3E? Is there a peripheral cabinet attached? Those should also have a serial port on the back you can try connecting to.


 

Sitemap 1 2 3 4 5 6 7 8 9 10