Author Topic: mitel 3000  (Read 2823 times)

markdevoll

  • Guest
mitel 3000
« on: April 14, 2010, 06:07:43 PM »
im trying to get a ip phone working on a 3000 with a broadband module. i have the dsl connected to the module and off that i have the ip set. on the ip set i get dhcp discovery option 128 missing. i can plug my computer into the phone and get on the internet but i cant get the phone working. i have the dhcp turned on in the broadband unit qne voip interface changed to iplan. what am i missing.


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: mitel 3000
« Reply #1 on: April 15, 2010, 07:53:14 AM »
Ok.  I'm making a lot of assumptions here so bear with me if this doesn't work.
Boot the phone while hold the 7 key.   It will ask you if you want to enter a TW (Teleworker) IP address.   
Enter in the IP address of the external interface of your 3000 or Teleworker Server.   
Bear in mind that the IP address can't start with a 192.168 or 10.   If it does then you can't do this without adding a Mitel Border Gateway.

Ralph
« Last Edit: April 24, 2014, 08:35:06 AM by ralph »


 

Sitemap 1 2 3 4 5 6 7 8 9 10