Author Topic: Embedded VM Issue  (Read 4376 times)

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Embedded VM Issue
« on: March 04, 2015, 12:55:27 PM »
Normally when a end user presses the VM button on the IP Phone, it takes them to their VM. For some reason, now when pressing the VM button, it prompts me to press # to dial. That has added a another step to get to the VM. I am sure I changed something that did this, but I cannot figure out what it was.


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Embedded VM Issue
« Reply #1 on: March 04, 2015, 01:44:39 PM »
What software release are you on?

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: Embedded VM Issue
« Reply #2 on: March 04, 2015, 02:07:49 PM »
6.0 SP3 - 12.0 release

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Embedded VM Issue
« Reply #3 on: March 05, 2015, 02:26:44 AM »
I know Call Coverage form can affect this.

Offline pmhaynes

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 238
  • Country: gb
  • Karma: +11/-0
    • View Profile

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: Embedded VM Issue
« Reply #5 on: March 05, 2015, 06:34:57 AM »
If it's following an upgrade, you may have forget the maintenance command upgrade bootrom all

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Embedded VM Issue
« Reply #6 on: March 05, 2015, 08:23:01 AM »
Yeah Call Coverage settings was my first thought as well, just wanted to make sure you were on a release that actually had the feature, which you do. Check that first.

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: Embedded VM Issue
« Reply #7 on: March 05, 2015, 12:22:48 PM »
I added the call coverage setting as shown above and made sure they have the same number in the service details. Still have the same issue. Something I noticed though, if they do not have a blinking light indicating a VM and just press the VM button it goes through without asking to press #. If you have a legitimate VM, it asks to press # to dial VM.



Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Embedded VM Issue
« Reply #8 on: March 05, 2015, 12:53:06 PM »
That doesn't sound right. I've got a 5340 on my desk talking to an MCD running the same release. Call Coverage is enabled with the VM option pointing to my VM hunt group (I'm using a centralized NuPoint instead of the embedded, so maybe that's the difference but I doubt it). My MWI is off, when I hit the message key I go straight to the VM login prompt.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Embedded VM Issue
« Reply #9 on: March 05, 2015, 01:12:41 PM »
Is this a problem with every phone or just some of them?

Ralph

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: Embedded VM Issue
« Reply #10 on: March 05, 2015, 02:30:56 PM »
It is all phones. I had them verify several phones. Any that had a blinking light was asked to press # to dial the VM.

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: Embedded VM Issue
« Reply #11 on: March 06, 2015, 10:16:30 AM »
Any other ideas?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Embedded VM Issue
« Reply #12 on: March 06, 2015, 03:08:38 PM »
The only other thing I can think of is perhaps not all the ports are in the VM hunt group or some of the ports don't have a VM COS assigned to it.

Ralph

Offline lowradiation

  • Full Member
  • ***
  • Posts: 127
  • Karma: +4/-0
    • View Profile
Re: Embedded VM Issue
« Reply #13 on: March 06, 2015, 03:17:40 PM »
As far as I know that's always how it worked (if you pressed the 'flashing' message key with the handset down)

If you lift up the handset first, then press the 'flashing' message key it will go directly to the mailbox without needing to press #

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Embedded VM Issue
« Reply #14 on: March 06, 2015, 06:19:59 PM »
Quote
As far as I know that's always how it worked (if you pressed the 'flashing' message key with the handset down)

If you lift up the handset first, then press the 'flashing' message key it will go directly to the mailbox without needing to press #

That's what I thought too :-)


 

Sitemap 1 2 3 4 5 6 7 8 9 10