Hi Folks,
This is only on a lab 3300cxi system, running 6.0 sp2, 12.0.2.23 software. It is not in a cluster.
I backed it up, loaded a blank database (dbms flag off, then reset system), and then did a restore.
Progamming for sets, etc came back but when I add a new policy in Admin Policies, default read-only, and then try to change all members below (or even change pages except for the first page or two) it return above error.
May not be related but I noticed that the radio buttons are all blank as well, for read/write, read only and no access, until I click one and attempt to select it - I would have thought that the read-only buttons would have been pre-selected because I chose that as default access type.
Google search did not turn up any current info on this error message, but I read about it happening for one customer with the telephone directory form, where they could only make changes to the first page members as well. Someone thought it may have to do with ESM database not being in sync with (another) database used behind the scenes....and that aftre rls 6 there should be a maintenance command to sync it - I do npt know that command...
DBMS check full came back with 0 errors.
Any help would be appreciated.