« previous next »
Pages: [1]   Go Down

Author Topic: firmware  (Read 3003 times)

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
firmware
« on: February 04, 2010, 10:49:44 AM »
colud anyone tell me how i check the sets firmware, i am using 5330,5212 and 5302 sets. system R8.0


dh
Logged

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: firmware
« Reply #1 on: February 04, 2010, 01:23:31 PM »
The easiest way it to reboot the set. It will tell you the rev when the set boots.
Logged

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: firmware
« Reply #2 on: February 04, 2010, 02:15:11 PM »
in maintenance commands type 'loc ext <number>' and the system will display a PLID fo rthe IP set. take this PLID and type 'firm PLID <PLID>'

not supported on AX controller or 5302 sets
Logged

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
Re: firmware
« Reply #3 on: February 06, 2010, 10:52:33 AM »
i am able to check firmware for the sets with command, but from the 5302 sets like as mentioned i cannot, so how could i check 5302 firmware.if i reboot 5302 how can i check the firmware?

dh
Logged

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: firmware
« Reply #4 on: February 07, 2010, 01:31:16 PM »
You don't. They have no screen so will not display anything. You would need to check the R8.0 Release notes for the set firmware load for that SW
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10