Speed and Duplex settings on a 3300

[MBholah]

Where are the speed and duplex settings on a mitel CX-II controller with release level 4.2, software load 10.2.0.26_2

Thanks,
Manny

[ralph]

The ethernet ports should auto negotiate. 

Ralph

[MBholah]

Ive seen these settings somewhere, in a form but cannot remember where they are - does anyone know which form please ?

[ralph]

Under Lan/Wan Configuration >>> Layer 2 Switch.

If you change it to something other than Auto Neg then be sure you change the port on the dataswitch you're connected to or else you could have some audio quality problems and other issues.

Ralph

[MBholah]

When I expand LAN/WAN configuration I get 2 sub forms:-

System IP Properties
LAN Policy (QoS)
DHCP
 - more dhcp sub forms etc

I do remember this layer2 switch form you mention now - could it be its different versions...why do Mitel always change things - please confirm ?

Manny

[ralph]

Now I don't remember.
Check the help files for "Layer" or "duplex" to see if you can find it there.

Ralph

[MBholah]

Looks like its been taken away....

(From the help files)

Note: The Layer 2 (L2) Switch form is not applicable to MCD for Industry Standard Servers (ISS).

The Layer 2 (L2) Switch form is used to program global settings and to configure the Ethernet ports for the Layer 2 switch. This form is used for the CXi, CXi II, MXe, MXe Server and AX controllers.

[v2win]

Its under the "Layer 2 Switch" form.

I have it on my CXi and MXe running the latest release.

What hardware and release are you?

[x-man]

Not available on the CX-11 only on CXi-11.

[v2win]

You are correct x-man. My lab switch is a CXi-2 not just a CXi