Mitel Forums > Mitel MiVoice Business/MCD/3300

3300icp vlan

<< < (5/5)

v2win:
2.5 meg unzipped

Here is the DHCP configuration guide for the MS DHCP server

This is a ZIP file rename it from .txt to .zip

chadmaynard:

--- Quote from: ralph on July 14, 2009, 08:03:32 AM ---
--- Quote ---Also, 172.16.30.0/24 isn't an rfc1918 network.
--- End quote ---

I had to stop an look up the RFC.
172.16.0.0      -   172.31.255.255  (172.16/12 prefix) is the actual private space subnet.

172.16.30.0/24 is just subnetting it down further.   Shouldn't be an issue.


--- End quote ---

That should have read 172.168.30.0/24 isn't a valid rfc1918 network.

Northeaster:
I am curious as to why the echo problems would have been reduced.  His IP sets were in the correct subnet (Voice Vlan IP address range, correct??)

Is it possible that the sets could have been in the right Vlan, but the data wans't being tagged / prioritized properly?

If someone could explain what was wrong, and is now corrected, I would appreciate it!!

Northeaster:
Using option 125 to identify the Vlan ID and priority is juts another way of providing the same info as options 132, 133.  So was it the untagging of the port that the 3300 was connected to, that fixed the echo?

NewVoip -  Do your IP sets now tell you what VLan / Piority they have, as they boot up??

Navigation

[0] Message Index

[*] Previous page