Mitel Forums > Mitel MiVoice Business/MCD/3300

3300icp vlan

<< < (4/5) > >>

ralph:

--- Quote ---Also, 172.16.30.0/24 isn't an rfc1918 network.
--- End quote ---

I had to stop an look up the RFC.
172.16.0.0      -   172.31.255.255  (172.16/12 prefix) is the actual private space subnet.

172.16.30.0/24 is just subnetting it down further.   Shouldn't be an issue.

Ralph

NewVoIP:
Been out sick, here are additional informations, we have a total of 102 phones, the MS Dhcp isn't assosicated with the VoIp vlan, Keep in mind the phones are working but there is so much echo, etc. We were told that we need to Untag the port that Mitel 3300 ICP and then set the opiton 125 of the mitel dhcp, Vlan 30 and Priorty 6. We test everything worked fine. Echo, jitters, etc tremendously reduce. But now we need to configure our HP switch to route/dhcp relay.
There are 5550 consoles, third party CA and VM that are interface with the Mitel via IP. We are trying to use one nic for above items needs. They need too access both data and voice network.

Thanks for all whom reply, greatly apprieciated.

v2win:
Your ports should be configured something like this

The MS DHCP server untagged on the data vlan only
the 3300 server untagged on the voice vlan only

Phones and PC's untagged data vlan and tagged voice vlan

for QoS  type-of-service diff-services is the line in the configuration for HP it shouldn't really matter if its all on the same lan.

I have a document on how to configure the MS DHCP server but its too large to attach here.

PM your address an I will send it to you or maybe one of the moderators can raise the limit on the size of attachments.

ralph:
Also,
You shouldn't need an IP Helper address if the options are set correctly in the native VLAN DHCP server.

Ralph

Chakara:
Didn't realize it was so low - bumped it to a meg - is that enough?

-Chak

Navigation

[0] Message Index

[#] Next page

[*] Previous page