Hi Guys,
I had a power faliure on a CXi & in the replacement CXi, I installed all the original relevant cards etc ( sys ID, HD & BRI Quad)
The CXi powered up with no alarms but had no power to the L2.
When viewing via main port, is says MIPS not up, L2 processor restting (something along this)
I have checked the status of the ports, they are enabled & the L2 has an IP address.
I have entered UpgradeBootrom All command but with no joy.
Thinking there was a problem with the hardware side of the replacement CXi, I have since installed all of the cards above into a BRAND new CXi but have exactly the same problem.
I decided that even though the original HD was showing as being healthy, I might as well format & reload software & database.
So the original HD has had the software reinstalled & the database restored.....and I still have the same problem.
The software running is 7.1.
I feel that there must be something that I forgot or I have done wrong...
Please can someone put me out of my misery
Any advise is welcome
regards
Washo