Author Topic: Warning Alarm  (Read 2691 times)

Offline donbru01

  • Contributer
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Warning Alarm
« on: October 27, 2012, 10:41:47 AM »
Hi at all , i have this issue .
From 3 week my Mitel 3300ICP rel 9 , randomly phone when answer incoming call "call drop" after it when phone try to make external call each time that is make 0xxxx i receive congestion .
I reboot phone , for 1-2-3-x call work after issue occurs .
I must restart callserver .
When i have this issue into software logs warning i receive it

Log Number:    2214
Severity:    Warning
Date:    2012/Oct/26
Time:    12:12:29
Source:    CCC_Ipsw
Description:    CompleteFsmRequest: MID:9b990989 CID: 799014d PCC[ 0x799014D ]: Tx[ TDM, PortId:20, CompId:24, DN: ] Rx[ IP_PHONE, PortId=501, CompId=1, DN:458 ] completed in [ 10020 ] msec in state [ STREAM_CLOSED ] with a failure [ FSM_TX_CLOSE_TIMEDOUT ]
File Name and Line Number:    IPSwSP_fsm.cpp;5176


Log Number:    2215
Severity:    Warning
Date:    2012/Oct/26
Time:    12:12:32
Source:    MSGMH
Description:    Open MID:849ee998 CID: 49ee156 MSGConnection[CID:49ac14c] already exists, OpenRxNack to CCC. 
File Name and Line Number:    MSGNegotiator.cpp;367


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Warning Alarm
« Reply #1 on: October 27, 2012, 11:08:55 AM »
I think congestion only has to do with trunking.
If you have more calls attempting to access a trunk group than you have trunks you usually get a congestion log.

What kind of trunks do you have?   And how many trunks do you have?

Ralph

Offline donbru01

  • Contributer
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Re: Warning Alarm
« Reply #2 on: October 28, 2012, 09:52:42 AM »
We have not more trunk , i suppose we have a corrupt database .
But we cannot able to investigate better for find this issue  , because we not know more command on Mitel
I suppose we have delete phone not correctly and after this command issue occurs

Offline donbru01

  • Contributer
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Re: Warning Alarm
« Reply #3 on: October 30, 2012, 10:20:49 AM »
Hi at all , i have solved issue .
this issue is present after upgrade 16 sip-trunk to Cisco Call Manager .
We have found that PBX isn't sincronize with ISDN PRI , after set clock correctly for the moment no problem

thanx


 

Sitemap 1 2 3 4 5 6 7 8 9 10