MCD 5.0 SP2 PR1 connected to a Multitech FaxFinder 240-IP

[kfranz]

Has anyone connected the Multitech FaxFindfer 240-IP to a MCD MXe III via SIP trunks.  Mitel Systems Engineering stated they don't have anything and that Mitel hasn't tested this setup therefore no documentation.  However when this was ordered Commsource recommended this product to the Account Executive.  Multitech doesn't have anything for this product either.  I have some limited SIP experience but obviously not enough to get this connected on my own.  Any thoughts for some direction?

[acejavelin]

Hmmm... think there was some mis-communication there, the part you really want it an FF240 (ANALOG, not IP), and connect it to a couple analog extensions on the controller, works great. I have only tried a little but, but never been able to get faxing working via SIP to any device.

[kfranz]

Thats what I'm finding out, have you worked with the Multitech MVP210 series?  If so has that worked for you, I've found information for that on the MOL.

[acejavelin]

Actually, yes I have... We have about a dozen or so deployed in a public school district, work great for voice, never been able to get data of any kind working through them though (including fax).