padlock

[tag]

Any one tell me how  "padlock" feature works in Mitel.

tag

[eng-hany]

1- enable phone lock in COS for IP sets or Analog sets not digital
2- assign codes for phone lock and phone unlock in Feature Access Code Form
3- assign user pin for the telephones in IP Set Configuration form for IP sets or Analog set Assignment form form for Analog sets

[tag]

Thanx eng-hany, i will try....

thanx

[tag]

2- assign codes for phone lock and phone unlock in Feature Access Code Form

I did not find any Feature like that?

tag

[Mattmayn]

They are between "Personal speedcall-store" and "Remote clear all features." Are you running a software version that supports it?

[tag]

In betwee those two features do not have,
I am using 8.0.7.16_2


tag

[Mattmayn]

The reason that you don't have the options is because it was not introduced until rel 9.0.0.41. Upgrade to at least 9.0 UR1 (9.0.0.41 is not considered a stable load) and it will work.

[tag]

Thank you

tag

[dh_lab]

when this feature is activated from the set, is their way to call internal number unless its de-activated.



dh_

[bobcheese]

extract from 3300 helpfile:

'Phone Lock has no effect on incoming calls but restricts outgoing calls, with the following exceptions: calls to emergency trunk routes and local operators.'

Although it doesnt specify what would be classed as a local operator. Try dialling 0 from a locked set.

[dh_lab]

I could not call any number while padlock is activated, even operator number 0 also.



dh