Author Topic: padlock  (Read 4683 times)

Offline tag

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
padlock
« on: February 28, 2009, 01:48:17 AM »
Any one tell me how  "padlock" feature works in Mitel.

tag


eng-hany

  • Guest
Re: padlock
« Reply #1 on: March 12, 2009, 10:03:52 AM »
1- enable phone lock in COS for IP sets or Analog sets not digital
2- assign codes for phone lock and phone unlock in Feature Access Code Form
3- assign user pin for the telephones in IP Set Configuration form for IP sets or Analog set Assignment form form for Analog sets

Offline tag

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
Re: padlock
« Reply #2 on: March 12, 2009, 05:00:41 PM »
Thanx eng-hany, i will try....

thanx

Offline tag

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
Re: padlock
« Reply #3 on: March 27, 2009, 06:26:34 AM »
2- assign codes for phone lock and phone unlock in Feature Access Code Form

I did not find any Feature like that?

tag

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: padlock
« Reply #4 on: March 27, 2009, 10:03:49 AM »
They are between "Personal speedcall-store" and "Remote clear all features." Are you running a software version that supports it?

Offline tag

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
Re: padlock
« Reply #5 on: March 27, 2009, 11:37:32 AM »
In betwee those two features do not have,
I am using 8.0.7.16_2


tag

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: padlock
« Reply #6 on: March 27, 2009, 01:29:32 PM »
The reason that you don't have the options is because it was not introduced until rel 9.0.0.41. Upgrade to at least 9.0 UR1 (9.0.0.41 is not considered a stable load) and it will work.

Offline tag

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
Re: padlock
« Reply #7 on: March 27, 2009, 02:10:55 PM »
Thank you

tag

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
Re: padlock
« Reply #8 on: December 22, 2009, 08:07:58 AM »
when this feature is activated from the set, is their way to call internal number unless its de-activated.



dh_

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: padlock
« Reply #9 on: December 22, 2009, 10:44:07 AM »
extract from 3300 helpfile:

'Phone Lock has no effect on incoming calls but restricts outgoing calls, with the following exceptions: calls to emergency trunk routes and local operators.'

Although it doesnt specify what would be classed as a local operator. Try dialling 0 from a locked set.

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
Re: padlock
« Reply #10 on: December 23, 2009, 03:00:10 AM »
I could not call any number while padlock is activated, even operator number 0 also.



dh


 

Sitemap 1 2 3 4 5 6 7 8 9 10