« previous next »
Pages: [1]   Go Down

Author Topic: MSL wont load on a Supermicro server  (Read 1639 times)

Offline KentWasser

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
MSL wont load on a Supermicro server
« on: July 02, 2024, 01:09:16 PM »
I cant seem to find drivers for an INTEL chipset so the MSL cant see the hard drives. Anyone else have this issue? never ran into this issue before.
Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MSL wont load on a Supermicro server
« Reply #1 on: July 03, 2024, 04:09:11 PM »
Have you looked at the Mitel documents for engineering and installing MSL? There are several changes to the BIOS that need to made for it to work properly... disable Secure Boot, hardware RAID, Intel RST, and other things.
Logged

Offline billbry66

  • Full Member
  • ***
  • Posts: 93
  • Karma: +3/-0
    • View Profile
Re: MSL wont load on a Supermicro server
« Reply #2 on: August 31, 2024, 04:39:23 AM »
might be that the MSL version isnt supported on the server you are trying to use

how are the drives connected  - have definitely had some issues in the past with raid cards not being recognsied

what version of msl?
Logged

Offline ACDeezNutz

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +2/-0
    • View Profile
Re: MSL wont load on a Supermicro server
« Reply #3 on: September 01, 2024, 08:30:00 PM »
Using bootable USB?  Build the bootable drive using Rufus in DD mode.  Something about the image bring corrupted if not built in DD mode.  I have had this happen many times the last few years to my techs.  If you burn MSL to a DVD this doesn't happen.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10