Author Topic: Mitel 3300 - Feature Codes *48 and *51 Not Working For Ring Group  (Read 925 times)

Offline MMarble

  • Contributer
  • *
  • Posts: 12
  • Country: us
  • Karma: +0/-0
    • View Profile
The Feature Access Codes for joining a group (*48) or leaving a group (*51) don't work for one of my ring groups.  I put in the code, input the group number when prompted, but I get a busy signal along with the message "Invalid Number".  Any ideas?


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1225
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Mitel 3300 - Feature Codes *48 and *51 Not Working For Ring Group
« Reply #1 on: June 22, 2023, 12:01:18 PM »
Is the problem Ring Group using the same COS as one that works? There's COS options to allow/deny members to change their presence.

Offline MMarble

  • Contributer
  • *
  • Posts: 12
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 3300 - Feature Codes *48 and *51 Not Working For Ring Group
« Reply #2 on: June 22, 2023, 02:05:04 PM »
Thanks, I'll take a look at that.

Offline MMarble

  • Contributer
  • *
  • Posts: 12
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 3300 - Feature Codes *48 and *51 Not Working For Ring Group
« Reply #3 on: June 22, 2023, 02:14:13 PM »
I just checked it.  The COS has "Group Presence Control" and "Group Presence Third Party Control" enabled.


 

Sitemap 1 2 3 4 5 6 7 8 9 10