Author Topic: mitell 3300 and uk pri isdn  (Read 5168 times)

Offline dexs345

  • Contributer
  • *
  • Posts: 20
  • Karma: +0/-0
    • View Profile
mitell 3300 and uk pri isdn
« on: December 07, 2010, 08:47:49 AM »
Hello again,

I am getting on with the mitel pretty well and in the next 2 days or so i will be installing my first isdn30 on a mitel 3300. However i have been playing about with another system (currently spare) in my isdn 30 and cant see to get it working at all.

Does anyone have a cheat sheet or how to guide to setup pri on the 3300?

Thanks for your help people


Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: mitell 3300 and uk pri isdn
« Reply #1 on: December 07, 2010, 04:18:13 PM »
Use the help file for this, thats what I normally do if I forget something when setting up PRI. It goes through each form and specifies what to set. log in to 3300 click help then; system programming->Trunks->Digital trunks->Program embedded PRI/QSIG (presuming you are using an embedded module for PRI).

Offline dexs345

  • Contributer
  • *
  • Posts: 20
  • Karma: +0/-0
    • View Profile
Re: mitell 3300 and uk pri isdn
« Reply #2 on: December 09, 2010, 07:12:06 AM »
Thanks for that. i had everything setup correctly however British telecom had a fault their site and i had to reset the NTE.

I can dial in without a problem however i cant seem to dial out? back to the help file me thinks.

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: mitell 3300 and uk pri isdn
« Reply #3 on: December 09, 2010, 07:55:56 AM »
have you done your ARS programming including route assignment?

Offline MitelUK2010

  • Sr. Member
  • ****
  • Posts: 201
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: mitell 3300 and uk pri isdn
« Reply #4 on: December 10, 2010, 06:25:54 AM »
If you are getting access denied then its a COR issue. Try using individual trunk select to eliminate COR and if that works you know your trunks are set up correctly and can then resolve the COR issues. 


 

Sitemap 1 2 3 4 5 6 7 8 9 10