Author Topic: Connecting a PSTN line to the 3300  (Read 1006 times)

Offline lbeck88

  • New Member
  • *
  • Posts: 1
  • Country: gb
  • Karma: +0/-0
    • View Profile
Connecting a PSTN line to the 3300
« on: February 20, 2019, 06:21:58 AM »
Hi all

Im trying to find out how I would connect an analog PSTN line to the Mitel 3300. We currently have an ISDN30e and a SIP trunk configured, but we have inherited a UMTS to PSTN gateway we wish to connect into the Mitel.

Any help would be appreciated :)


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Connecting a PSTN line to the 3300
« Reply #1 on: February 20, 2019, 07:18:52 AM »
Depending on model 3300's have embedded analog units fitted that take PSTN lines via RJ11 connections 4 ONS and 6 LS trunks IIRC) Look on the rear panel. You will need to programme various bits on the Mitel to get the to work. It can get a bit fiddly and I would suggest you line them up using the provided test to make sure they work correctly.

If you are not sure then get your provider in.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Connecting a PSTN line to the 3300
« Reply #2 on: February 20, 2019, 09:55:05 AM »
Physical controller, you connect it to the embedded ASU, I believe all hardware platforms have 4-6 CO line ports.

If it is a virtual controller, then you need an FXO gateway, like a Mediatrix C7 series device (example, there are lots of approved devices). 


 

Sitemap 1 2 3 4 5 6 7 8 9 10