HI
can any one tell me how can make interconnect btween two PRi means
same controller having Two PRI 10 extension take one PRI and other 10 Take Other PRI means two Office Run on same Controller two Seperate PRI
So if I understand this correctly, you have one controller with two PRI circuits... Phones in group A need to use PRI 1 and phones in group B need to use PRI 2?
Pretty easy via ARS, not simple but not super difficult if you understand ARS... build your routes, unique for each group, then make every dialed digit string go to a Route List, entry one is group A's PRI route and group B's PRI is entry two... Now use unique COR's to restrict one from accessing the other ones route.
Route 1 - PRI 1 - COR group 10
Route 2 - PRI 2 - COR group 20
Route List 1 - 1: Route 1, 2: Route 2
Dialed Digits X - List 1
In COR Group 10, place the CORs used by Group B phones
In COR Group 20, place the CORs used by Group A phones
This is extremely simplified... you will need to expand as needed for your site's requirements.