Mitel Forums > Mitel MiVoice Business/MCD/3300
Route Calls by Specific Day
Chakara:
I went through this on a similar install and yeah - no can do - best I could find. It is an odd limitation....
-Chak
ralph:
A long time ago, in my Mitel 2000 days, I was working on a PC program that would schedule a modem to dial feature codes just for something like this. It would constantly check time of day and if you had a scheduled event for that time it would make the modem dial what ever was in the dial stream for that event. So you could have the modem dial the feature access code for day mode at 8:00am and night mode at 5:00pm on any given day.
Unfortunantly, due to some internal BS, I had to abandon the project and all the source code is long gone.
If you have OpsManager, it will do this so I am assuming you do not have OpsManager.
Otherwise, perhaps you could do some digging on the internet and find a script that will use a PC to do something via a modem.
The 3300 just isn't going to do it natively. Looks like we need a DCR with Mitel.
Ralph
mickbobin:
Thanks for the investigation guys. I will go down the manually setting to night switch route I think. Just that in this location we do not have a receptionist every day of the week and although we want calls to individual extensions going through as expected, calls to the primary number need to be routed back to head office to be resolved from there.
Yes indeed, it seems to be an oversight on Mitels behalf as there is pretty much nothing else it won't do.
Cheers
ralph:
I'll have to do some checking around. It occurs to me that it could be done with a scripted telnet session. Check around the internet and look for a telnet application that will do time of day/day of week scripting. Then you just have to install the app on a pc that is always on.
I'll look around but my time is limited just now.
Ralph
v2win:
Do you have IP trunks? If you do we can create a IP loopback trunkgroup and use the route plan assignment to get through this
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version