disable Mitel 3300 signalling encrytion

[arash]

Hello,

I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.

Is there any way to disable this feature from 3300?

I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.

[acejavelin]

Hello,

I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.

Is there any way to disable this feature from 3300?

I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.

Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).

[arash]

Hello,

I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.

Is there any way to disable this feature from 3300?

I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.

Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).

It just disable voice encryption but not the signalling.

[acejavelin]

Hello,

I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.

Is there any way to disable this feature from 3300?

I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.

Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).

It just disable voice encryption but not the signalling.

To be honest, I didn't think signalling was encrypted, only audio... When support has us do captures that is the only change made.

Sent from my XT1575 using Tapatalk

[petr.necas]

See which port is used for MiNet signalling, it should be any of these:

6800 TCP MiNet Server (at 3300)
6801 TCP Secure MiNet (SSL) (at 3300)
6802 TCP Secure MiNet (AES) (at 3300)

[arash]

See which port is used for MiNet signalling, it should be any of these:

6800 TCP MiNet Server (at 3300)
6801 TCP Secure MiNet (SSL) (at 3300)
6802 TCP Secure MiNet (AES) (at 3300)

It is 6802, AES ...