« previous next »
Pages: [1]   Go Down

Author Topic: CEPT link failure  (Read 1712 times)

Offline tone-the-phone

  • Contributer
  • *
  • Posts: 20
  • Karma: +0/-0
    • View Profile
CEPT link failure
« on: June 23, 2015, 09:44:57 AM »
Our network provider has recently moved the delivery point for our E1/T1 links on their network to a different switch and now when I check the link with the dts re PLID command I get "Link is not available, which speaks for itself but this is followed by "relay test failed" can anyone tell me what this is referring to.
I am running MS2009-F-UK-00 Edition SX.Q23.2.5 on an SX2000 lite.
Logged

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: CEPT link failure
« Reply #1 on: June 23, 2015, 12:54:18 PM »
Not sure.
Is this a PRI?
Can you create a loop back plug and loop it up to itself?

Ralph
Logged

Offline tone-the-phone

  • Contributer
  • *
  • Posts: 20
  • Karma: +0/-0
    • View Profile
Re: CEPT link failure
« Reply #2 on: June 24, 2015, 08:38:18 AM »
Hi Ralph it is an ISDN 30 link with BNC connectors.  I put a loop on the card and the error was still there so I have reloaded the card and it cleared, the link is now connected to the external trunk circuit and working OK.

Tony :)
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10