« previous next »
Pages: [1]   Go Down

Author Topic: NTP Force Sync  (Read 2211 times)

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
NTP Force Sync
« on: March 24, 2015, 03:56:50 PM »
If I change the NTP IP address on the PBX but the time is still off from my PC to phone is there a way to force the PBX to sync up to the address I entered? Both my phone and PC are pointing at the same NTP server and should be spot on but the phone is a few minutes behind.

Thanks,
Logged

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: NTP Force Sync
« Reply #1 on: March 24, 2015, 03:59:31 PM »
They will never completely match. Mitel's approach has always been that the time on the phones is a "representation of time, and not to be used as an accurate time keeping device."

Picking up the handset of the phone will force the phone to re-sync to the controller though.
Logged

Offline boycey9

  • Full Member
  • ***
  • Posts: 182
  • Karma: +4/-0
    • View Profile
Re: NTP Force Sync
« Reply #2 on: March 27, 2015, 05:01:02 AM »
To Expand on the previous comment, Phones do not use NTP, the controller uses NTP then the Phones talk to the controller periodically, if yous search back a few weeks you will find a full explanation of this in detail.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10