Author Topic: 3300 MXe III can not boot successfully  (Read 15295 times)

Offline nguyenhung

  • Contributer
  • *
  • Posts: 17
  • Country: vn
  • Karma: +0/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #15 on: June 12, 2014, 11:02:05 PM »
Hi all,

Thank you for all your kind support!

I set "host inet (h)" to 192.168.1.21 (my PC's IP Address) and now i can ping to IP Address 192.168.1.2 of 3300 MXe III from my PC (pic.1 and pic.3).

But I still can not load file successfully from my FTP server. I did install FileZilla Server on my PC to establish a FTP server. And I also enabled 1 account ftp with password ftp, after that I configure "Shared Folders" to the location of "MCD_Installation_12.0.3.15.exe" file (pic.2). The error is in the log file as below:

Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device          : qefcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h)        : 192.168.1.21
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0
other (o)            : FixPartition

Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...  timeout - retry
Loading...
Error loading file: errno = 0x3c.
Can't load boot file!!


I hope that all of you will be willing to help me fix this problem.

Thank you and best regards,
Spencer


Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #16 on: June 12, 2014, 11:35:18 PM »
MCD Installation file is a self extracting exe.
Run the file on your laptop and it will extract all files needed for software installation.
You will then point your ftp shared folder to the location where they were extracted.

Offline nguyenhung

  • Contributer
  • *
  • Posts: 17
  • Country: vn
  • Karma: +0/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #17 on: June 13, 2014, 12:08:51 AM »
Hi Sarond,

Following your instruction, I did install "MCD_Installation_12.0.3.15.exe" file on my PC and set "Shared folders" to the extracted location (C:\Program Files (x86)\Mitel\3300ICP\12.0.3.15) on FileZilla Server. But this problem is still appeared. Could you please let me know what I should continue to do?

Thanks and best regards,
Spencer

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #18 on: June 13, 2014, 12:14:44 AM »
Try verifying that your FTP server is working, accessing it from another computer on the same lan. That way you can also double check permissions.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #19 on: June 13, 2014, 01:16:40 AM »
I have had this before and it was a bad HDD, tried a different drive and it worked.

Also look at this thread.

http://mitelforums.com/forum/index.php?topic=4876.msg21445#msg21445

Offline ghost

  • Full Member
  • ***
  • Posts: 185
  • Country: au
  • Karma: +11/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #20 on: June 13, 2014, 03:03:04 AM »
if you dont have a 2nd pc on the network you can do the following (it just wont pickup if you have an issue with firewall blocking traffic)

open cmd and type "ftp localhost" without quotes and login using ftp and ftp then type "dir" and you should see the contents of the 12.0.3.15 directory (if it doesnt your setup is wrong)

looking at your screenshot you are showing the administrator account shared folder not the ftp account shared folder

Offline pmhaynes

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 238
  • Country: gb
  • Karma: +11/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #21 on: June 13, 2014, 03:54:30 AM »

I set "host inet (h)" to 192.168.1.21 (my PC's IP Address) and now i can ping to IP Address 192.168.1.2 of 3300 MXe III from my PC (pic.1 and pic.3).


Well bu**er me i did not know that not having this would stop a ping from working!
I realize you need this set correctly but not that it would not reply to pings if it was not set.

Nothing more to add then the great advise you have already had.

Offline nguyenhung

  • Contributer
  • *
  • Posts: 17
  • Country: vn
  • Karma: +0/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #22 on: June 13, 2014, 04:18:26 AM »
Hi All,

Thank you so much for all your kind support.

Following all your instructions, this problem has just been fixed and my IP-PBX is working well :)

Have a nice day!

Thanks and best regards,
Spencer

Offline pmhaynes

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 238
  • Country: gb
  • Karma: +11/-0
    • View Profile
Re: 3300 MXe III can not boot successfully
« Reply #23 on: June 13, 2014, 04:28:36 AM »
Hi All,

Thank you so much for all your kind support.

Following all your instructions, this problem has just been fixed and my IP-PBX is working well :)

Have a nice day!

Thanks and best regards,
Spencer

Great news, well done ;D


 

Sitemap 1 2 3 4 5 6 7 8 9 10