Download software release MCD 4.1 Sp2 - 10.1.0.69_1

[steve75]

Hi,
i need to download this release software for my customer with 3300 Mxe, but into Mitel site i don't find this release
MCD 4.1 Sp2 - 10.1.0.69_1

Its my problem or, mitel have delete this reference into download area?
Anyone can help me?

Steve

[august]

I don't see it either.  If you have SWA, you can just do an upgrade.

[johnp]

Why not go to 4.2? I don't think you need SWA for in stream fixes.

[august]

I think you're right:

c.   The following chart summarizes the following requirement whether new password is required for manually entering password in LOS ; OR whether you need to re-retrieve ARID via SI or ESM’s LOS during the upgrade to reflect the new password used.
   
From \ To   MCD 4.0    MCD 4.1 & its SPs   MCD 4.2 & its SPs
9.0 URs      Yes   Yes*
(see conditions above)   Yes*
(see conditions above)
MCD 4.0    No   Y   Y
MCD 4.1 & its SPs   N/A   N/A   N
MCD 4.2 & its SPs   N/A   N/A   N

[ghost]

i have a copy of 10.1.1.11_2 here if needed, but if you can do 10.2 i would recommend it (or if you got valid software assurance you could look at mcd 5)

[sarond]

I have 10.1.0.69 if needed.

[ralph]

I have 10.1.0.69 if needed.

Reminder: Send it privately.  We can't post that here.

Ralph

[steve75]

Thanks a lot for our reply!
Sarond send me a link to download a software release and i have solved my problem!

Thanks to all!
Steve

[sarond]

I think you're right:

c.   The following chart summarizes the following requirement whether new password is required for manually entering password in LOS ; OR whether you need to re-retrieve ARID via SI or ESM’s LOS during the upgrade to reflect the new password used.
   
From \ To   MCD 4.0    MCD 4.1 & its SPs   MCD 4.2 & its SPs
9.0 URs      Yes   Yes*
(see conditions above)   Yes*
(see conditions above)
MCD 4.0    No   Y   Y
MCD 4.1 & its SPs   N/A   N/A   N
MCD 4.2 & its SPs   N/A   N/A   N

Sorry to bring up an old thread.

Am I correct in assuming that if there is no active SWA that I can upgrade a system from MCD4.1 SPx to MCD4.2 SPx?
Has anybody tried this with inactive SWA? I thought any major release change needed SWA.

[johnp]

It should work, I upgraded a 4 something system to 4.2, didn't have access to the app record but it wouldn't go to 5.