« previous next »
Pages: 1 [2]   Go Down

Author Topic: Boot Mitel 5224 via VPN  (Read 11271 times)

Offline stuart3380

  • Contributer
  • *
  • Posts: 15
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Boot Mitel 5224 via VPN
« Reply #15 on: March 06, 2013, 10:17:57 AM »
Johnp as you can probaly guess i am a novice to all of this, could you explain how to go about this.

thanks
Logged

Offline stuart3380

  • Contributer
  • *
  • Posts: 15
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Boot Mitel 5224 via VPN
« Reply #16 on: March 07, 2013, 07:33:02 AM »
Hi

i am now getting the IP showing on the phone, but i am getting RTOS DHCP timeout??

Guessing it is not seeing the servers?
Logged

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Boot Mitel 5224 via VPN
« Reply #17 on: March 07, 2013, 08:59:03 AM »
This looks the same as a post on the tek-tips web site. In that posting the user statically setup the phone as 192.168.1.x but gave it a gateway IP of 10.0.0.50 which was the same as the IP address of the 3300. The suggestion there was to go with static but give the phone a gateway off the 192.168.1.x subnet.
Logged

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Boot Mitel 5224 via VPN
« Reply #18 on: March 08, 2013, 03:08:23 PM »
Provide the ouput of a route print. Is the 2wire your home dsl router? I would buy a wireless gateway that will create an ipsec tunnel, put the 2wire in bridge mode, the phone could be in Teleworker mode, and your pc should be able to connect back to hq. Then have a beer and call it a day :-)
« Last Edit: March 08, 2013, 03:20:24 PM by johnp »
Logged

Pages: 1 [2]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10