Plane B Winch alarm in Sx2000

[Jack Xu]

Hi..  i have've got a sx2000 system , recently there 's a "Plane B Winch" alarm , and there's a big red "X" from the console.... could anyone give me any advice that what's the alarm? Thanks..

[ralph]

Odds are good that your Plane B hard drive is down and no longer works.

In maintenance commands enter "Show Fault Alarm"   and post what it says here.

Ralph 

[Jack Xu]

Ralph,there's hardware fault info.  when enter "Show Fault alarm",but i could not find anything wrong except the big red X on console.  i've switched to plane A manually and enable the switch freeze in case the PBX go down .  i'm wondering if its the Mainboard issue?

[ralph]

When you switched to plane A did Plane B come up ok?

Ralph

[Jack Xu]

yes. when i switched to plane A,the plane B restarted, i could not find any alarms anymore.

[ralph]

That may have solved the problem.
Do a backup to the hard drive (both of them) and then be sure you can do one to the RSD.
If there's a problem with the hard drive a backup should prove it.

Ralph