MBG/SRC fallback addresses

[Dogbreath]

SRC cluster currently has both SRC IPs in the fallback addresses list.
If I put the MiVB IPs in there too, would the handsets try that if both the SRCs were dead?
It's a bit "corner case" but I am sure the customer would rather their handsets keep working without call recording, if both SRCs were dead but the MiVB was still on.

[dilkie]

it will work but the sets won't come back to the SRC(s) when they are back in service. You'll have to manually reboot the sets and make sure the SRC addresses are listed first.

it's not recommended because you'll very likely lose call recording and most CR installations have that as a legal requirement.

If you're worried about the loss of 2 SRC's, install more in the cluster and give them geographic (or at least lan) distribution. You can use cluster zones to keep sets at the main 2 unless both are down.