5330 Hot Desk Enabled.

[Toodyt]

I have a 5330e phone which was added to a 3300. MCD6 software.
The picture shows the Hot Desk symbol in the top left corner.
However I have never enabled Hot Desk in any phone in the system.
I cannot clear it using Clear all features.
Any advise appreciated.

Sent from my SM-G920W8 using Tapatalk

[Toodyt]

I have a 5330e phone which was added to a 3300. MCD6 software.
The picture shows the Hot Desk symbol in the top left corner.
However I have never enabled Hot Desk in any phone in the system.
I cannot clear it using Clear all features.
Any advise appreciated.

Sent from my SM-G920W8 using Tapatalk

[Toodyt]

I have a 5330e phone which was added to a 3300. MCD6 software.
The picture shows the Hot Desk symbol in the top left corner.
However I have never enabled Hot Desk in any phone in the system.
I cannot clear it using Clear all features.
Any advise appreciated.

Sent from my SM-G920W8 using Tapatalk

[Toodyt]

I have a 5330e phone which was added to a 3300. MCD6 software.
The picture shows the Hot Desk symbol in the top left corner.
However I have never enabled Hot Desk in any phone in the system.
I cannot clear it using Clear all features.
Any advise appreciated.

Sent from my SM-G920W8 using Tapatalk

[Toodyt]

I have a 5330e phone which was added to a 3300. MCD6 software.
The display shows the Hot Desk symbol in the top left corner.
However I have never enabled Hot Desk in any phone in the system.
I cannot clear it using Clear all features.
Any advise appreciated.

Sent from my SM-G920W8 using Tapatalk

[Toodyt]

I have a 5330e phone which was added to a 3300. MCD6 software.
The display shows the Hot Desk symbol in the top left corner.
However I have never enabled Hot Desk in any phone in the system.
I cannot clear it using Clear all features.
Any advise appreciated.

Sent from my SM-G920W8 using Tapatalk

[gpais70]

Hi Team,

I intend to use VoIP/IP solution in Mitel 430 e 3300, where extensions work outside the office, what should I  do?
Please assist

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,

I intend to use VoIP/IP solution in Mitel 430 e 3300, where extensions work outside the office, what should I  do?
Please assist

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,

I intend to use VoIP/IP solution in Mitel 430 e 3300, where extensions work outside the office, what should I  do?
Please assist

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,

I intend to use VoIP/IP solution in Mitel 430 e 3300, where extensions work outside the office, what should I  do?
Please assist

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,

I intend to use VoIP/IP solution in Mitel 430 e 3300, where extensions work outside the office, what should I  do?
Please assist

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,

I intend to use VoIP/IP solution in Mitel 430 e 3300, where extensions work outside the office, what should I  do?
Please assist

Germano

Enviado do meu ALE-L21 através do Tapatalk

[simplex8522]

I have a MyVoice 250 and some phones would loose connection to the Mitel system and when I unplugged the phone and reconnect it, the booting process takes a very long time to come up. Sometimes I need to unplug it a couple of times.
Also I can't connect to the Mitel system for programming from my computer anymore.
Can this be a problem with the switch or the Mitel system. I'm using a Dell Power Connect 5524 switch.
Has anyone else had this problem?

I would appreciate any help you can give.
Thank you very much.

Sent from my Z981 using Tapatalk

[gpais70]

Hi Team,
It been more than 2 months since no access to our mitel 430.
We acquired more 2 mitel 6863I, however when I star the configuration the admin password does not work than I can not access the controller.
I do not intend to reset the system for obvious reasons will lose data and work hard.
Is there any way to access it?
Alternative password?

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,
It been more than 2 months since no access to our mitel 430.
We acquired more 2 mitel 6863I, however when I star the configuration the admin password does not work than I can not access the controller.
I do not intend to reset the system for obvious reasons will lose data and work hard.
Is there any way to access it?
Alternative password?

Germano

Enviado do meu ALE-L21 através do Tapatalk