How do tell if a number is a POTS line or coming in over PRI?

[ScottL]

How do tell if a number is a POTS line or coming in over PRI? Is there a list in the Mitel 3300, somewhere? I looked in the Speed Calls form and see a number associated with the extension, but how do I know if the number comes through the copper lines or the PRI?

Thank you,

Scott

[NEPhoneGuy]

You could do a EDT TRACE TSP L2L3 <PLID> and see if the digits are coming across the span?

[acejavelin]

You could do a EDT TRACE TSP L2L3 <PLID> and see if the digits are coming across the span?

Pro Tip: enter the command again when your done to stop the trace, or it will clog your maintenance terminal when you are to do other things later.

[NEPhoneGuy]

You could do a EDT TRACE TSP L2L3 <PLID> and see if the digits are coming across the span?

Pro Tip: enter the command again when your done to stop the trace, or it will clog your maintenance terminal when you are to do other things later.

This is true. I've forgotten to reissue the command a few times. Same with the CCS Trace Enable Continuous