3300 SIP trunk

[MJJONES]

I have a mitel 3330 on 10.1.1.11_2
I'm trying to bring in a SIP trunk from broadvox. Every time i try to make a call i get a busy signal. When i call broadvox they tell me that the system is adding a + to the 10 digit number I'm dialing.

I don't have any ARS leading digits requirements and i don't have any digit modification plans?

Any suggestion on how i can get the system to stop send the +

[bluewhite4]

The "+" is an option set in the sip peer profile assignment form. Double check that that isn't selected.

[MJJONES]

That worked, I cant believe i didn't see that setting before.
With my PRI, only 4 numbers were sent down the line so it was pretty simple to program extensions with DIDs.
The sip trunk sends all 10 numbers down the line, how to a program an extension to ring when using all 10 numbers?

[bluewhite4]

Create the SIP trunks their own Trunk Service Assignment or Trunk Attributes number, and tell it to strip either 3 or 6 digits. (Make sure to put in here to insert 0.)

If you strip 3, then using System Speed dials create entries for the last 7 of each DID and point it to the needed extension.

If you strip 6, then the extension will match the DID.

[MJJONES]

Perfect, once again that helped out.

Outbound calls work perfectly. With an inbound call, the phone rings and as soon as i pick it up the call gets disconnected. Any ideas?

[bluewhite4]

Not off the top of my head. Does outbound work completely now?

[MJJONES]

issues resolved.

[Chakara]

  What was the fix?

[MJJONES]

Sorry i didnt post what fixed the issue. I ended up having to buy an Ingate Siparator 19. Once i got that configured correctly, inbound and outbound call started working. I couldnt use my MBG server as a SIP proxy because its in server only mode.