Messages

1

Mitel SX200, SX2000, and older SX platforms / Re: how to adjust settings via Telnet

« on: October 15, 2013, 09:15:34 AM »

Ok
so whatever # people dial to reach their voicemail is the destination.

will try.

thanks again for helping out.

update : that worked ! thank you very much for helping me find & understand these codes.

If there is a proper manual that lists these sorts of things let me know....the 5 Ive found online may not be the correct ones

2

Mitel SX200, SX2000, and older SX platforms / Re: how to adjust settings via Telnet

« on: October 14, 2013, 04:50:41 PM »

ok great, thank you so much.
that solves many problems for me.

Also, would XXX be the extension number, or another number associated with the extension? If so how to find that?

3

Mitel SX200, SX2000, and older SX platforms / Re: how to adjust settings via Telnet

« on: October 14, 2013, 03:24:16 PM »

Ok JohnP

In my Feature Access Codes section under Forms, this is what it states for Call Forwarding - All Calls :

Feature                              Access Code
03                                        29


So, knowing this I can go to this analog phone extension and dial, 03294 to get all calls to go to voicemail with a busy/no answer ?

4

Mitel SX200, SX2000, and older SX platforms / Re: how to adjust settings via Telnet

« on: October 14, 2013, 02:11:15 PM »

thanks Johnp

how/where do I find what my featured codes are ? Just go to Access Codes under forms ?

This is a piece I'm missing, what I need to dial to control settings on an analog like this.

5

Mitel SX200, SX2000, and older SX platforms / how to adjust settings via Telnet

« on: October 14, 2013, 12:14:28 PM »

Hello,

I am very inexperienced with the interface to our SX 200 EL-ML and was hoping for some guidance.

The current issue I am troubleshooting is an analog phone (not a Superset 4025 like the others) with call forwarding issues. At first the phone would not ring, but simply go straight to voicemail, so dialing 444 on the keypad reset it & it was able to recieve calls again....but now it will not go to voicemail.

Can anyone guide me on the possible steps/forms I need to find in order to adjust this extensions call forwarding settings? I've been looking through menus/forms, but currently am unable to locate a method for adjusting this remotely. The digital phones are simply enough via Superkey settings, but the analog phones are a mystery to me at this point.

Thanks for any guidance you can offer.

aap