Messages

1

MiVoice Office 250/Mitel 5000 / Re: View Outpulsed Digits Sent to CO - MiVO 250

« on: August 29, 2019, 01:11:29 PM »

Tech Electronic....thank you.  This is PRI.  D-Channel Diag revealed one of my digits was getting truncated. 

2

MiVoice Office 250/Mitel 5000 / View Outpulsed Digits Sent to CO - MiVO 250

« on: August 29, 2019, 12:24:31 PM »

Hello, I'm playing around with ARS and would like to see what digits are getting sent to the CO....is there anywhere to view via the SAD tool?  Or, any other method?

3

Mitel MiVoice Business/MCD/3300 / Re: MiVB Internal Twin to Algo 8180

« on: August 22, 2018, 12:15:39 PM »

I was able to get this working.  I built a TWINNED EXT as X*XXX as part of the HDUG.  Made it MultiDevice and Generic SIP.  In the Algo I put the X*XXX as the extension and the SIP credentials defined.  Now, when I call the extension XXXX, both XXXX and X*XXX ring. 

4

Mitel MiVoice Business/MCD/3300 / MiVB Internal Twin to Algo 8180

« on: August 21, 2018, 02:26:46 PM »

I'm trying to get an Algo 8180 SIP Ext that is my overhead ring device to ring when the 6920 desk phone rings.  What is the best way to do this.  The SIP 8180 is registered and rings when I call it's extension.  However, I set up a MDU with the base phone and twinned ext.  Enabled External HD, no Prefix and the number field is the internal extension number of the SIP device.  This does not work.  I've verified that the base and twin are in the same MDUG.  Any help would be appreciated.  The Algo 8180 is just a Generic SIP device in the MiVB.

5

Mitel MiVoice Business/MCD/3300 / Re: The directory number is of the wrong type - Twinning

« on: August 21, 2018, 01:48:15 PM »

Thank you for the replies.  Personal Presence worked.  Thank you. 

6

Mitel MiVoice Business/MCD/3300 / The directory number is of the wrong type - Twinning

« on: August 16, 2018, 02:32:36 PM »

Hello....trying to set up twinning on MiVB 8.0 SP3 PR2 on a 6930 phone.  Have a Multi-Device User Group set up.  Trying to put the X*XXX Twin extension on a button on the base phone as GROUP PRESENCE, X*XXX.  I keep getting the error, "The directory number is of the wrong type".  I've verified X*XXX is in the MDU Group.  External Hot Desking Enabled is set to Yes.