Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ggesto on November 28, 2024, 02:34:19 PM
-
Hi everyone, i'm implementing an AA with the embedded VM.
The AA is working well, in the DID form, I've the DID Number redirected to DN 6000. How can I create a dummy (or virtual or phantom) DN thats no consume an user license? Because actually, I made it works with the DN 6000 as Generic SIP Phone.
Many thanks for all
-
This would depend upon what version is running. Current has potentially the ability to do callflow
-
Hi johnp, thanks. I have the latest version. And I create a call flow. But how I can create a DN that not consumes an IP User License? Actually I create a DN as usual, but I think that should do it from another way and I don't know how.
-
Hi everyone, i'm implementing an AA with the embedded VM.
The AA is working well, in the DID form, I've the DID Number redirected to DN 6000. How can I create a dummy (or virtual or phantom) DN thats no consume an user license? Because actually, I made it works with the DN 6000 as Generic SIP Phone.
Many thanks for all
There are several ways but one of the most straightforward is a System Speed Call.
-
There are several ways but one of the most straightforward is a System Speed Call.
[/quote]
Hi ZuluAlpha, could you explain? Sorry, but i have a lot of years working with another brand of PBX, but i'm new with Mitel.
Many thanks!!
-
There are several ways but one of the most straightforward is a System Speed Call.
Hi ZuluAlpha, could you explain? Sorry, but i have a lot of years working with another brand of PBX, but i'm new with Mitel.
Many thanks!!
[/quote]
There is a form called "System Speed Calls" that you can point a DID to another destination on your system.
-
I would set this up using a trusted license, I usually make them 5020 phones as it is the default for a Nupoint port