Messages

271

MiVoice Office 250/Mitel 5000 / Re: Different ring tones for different lines from one phone?

« on: March 26, 2013, 07:57:31 AM »

I stumbled across it by mistake on my last multi-node install when some wanted their DID/DDI lines to ring to a separate key (you can't do this to many, for it requires a separate key map per phone) and the secondary key appearance gives a sort of broken ring that is different from the ext or int ring.

Try it and see what you think...

Jim

272

MiVoice Office 250/Mitel 5000 / Re: Different ring tones for different lines from one phone?

« on: March 25, 2013, 04:59:18 PM »

Try assigning a line to a phantom and have the phantom set as a secondary extension key on the phone. That should provide a different ring tone for that line...

Jim

273

MiVoice Office 250/Mitel 5000 / Re: Remote Admin

« on: March 20, 2013, 01:06:42 PM »

I agree that remote admin via ethernet is the best...and easy...I am fortunate to work for a telco where I normally have access to the router to do the port forwarding. Typically I only have to change port 80 and sometimes port 22 to something else...and I'm on my way...but some systems like the SX200 or the Nortel Meridian need a baud rate connection and it for those I pack around my ancient Dell...for the RJ11 port

274

MiVoice Office 250/Mitel 5000 / Re: Dect handset call logging

« on: March 19, 2013, 11:07:37 PM »

Yeah it is the call history that pops up that is so irritating

275

MiVoice Office 250/Mitel 5000 / Re: Remote Admin

« on: March 19, 2013, 03:03:03 PM »

The 5000 also has an analogue modem on extn 1500, you can route a spare DDI to 1500 and use a cutting edge 56k dial up modem to access.

I like modems...however, I haven't had a laptop in the past five years that had an RJ11 port...and that's sad. If I need to dig out my ancient Dell and dial away

276

MiVoice Office 250/Mitel 5000 / Dect handset call logging

« on: March 19, 2013, 02:58:09 PM »

How do I turn the call logging off of the 5610 Dect handsets...I have looked in the Dect Stand config guide and in the 5000 and I find nothing relating to call logging for the SIP phones

Thanks, Jim

277

MiVoice Office 250/Mitel 5000 / Call Park on 5000 HX 4.0

« on: December 01, 2010, 10:21:24 AM »

I have a customer coming from a Nortel system and they want Call Park. I have looked through every feature on the system and I don't see an equivalent. What am I missing?

Jim

278

MiVoice Office 250/Mitel 5000 / Re: Mitel 5000 setup

« on: December 01, 2010, 10:18:36 AM »

What kind of controller do you have, and what release is it??