« previous next »
Pages: [1]   Go Down

Author Topic: Issues With MXe Not Booting with a DSP II Installed?  (Read 3000 times)

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Issues With MXe Not Booting with a DSP II Installed?
« on: September 14, 2010, 01:22:48 PM »
Has anyone had any issues with an MXe not booting with a DSPII installed?

I have a brand new controller (second one, tech support declared 1st DOA because of this) that will not boot with a DSPII installed. I have tried with it in slots 4-6 with same results. I know the card works because it will boot in another MXe that I have in my lab.

I have attached a text capture of the boot process, the good stuff is at the end.
« Last Edit: April 06, 2013, 11:21:40 AM by ralph »
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: DSP II
« Reply #1 on: September 14, 2010, 01:45:21 PM »
I would assume that tech support verified that the version of software you are using is compatible with the DSPII.

I would lay odds it's a faulty DSP.   Have you tried a different DSPII?

Ralph
« Last Edit: April 22, 2014, 04:03:33 PM by ralph »
Logged

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: DSP II
« Reply #2 on: September 14, 2010, 02:13:52 PM »
MCD 4.1 SP2

The DSPII works in another controller. I have another DSPII that is new and it does the same thing.
Logged

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: DSP II
« Reply #3 on: September 14, 2010, 02:29:29 PM »
there is now SP2-PR1 have you tried upgrading to this? Also what version is the controller were the DSPII works?
Logged

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: DSP II
« Reply #4 on: September 14, 2010, 02:32:16 PM »
I have not tried that version.

The other controller is running MCD 4.1 no SP
Logged

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: DSP II
« Reply #5 on: September 14, 2010, 02:43:51 PM »
Looks like the dual T1 cards may be causing this. Controller boots fine with the DSPII and without the T1 cards. Trying with one T1 now to see if it is a single card causing the issue or if it is the combination of the two card types.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10